Chapter 7 __________________________________________________ Host Computer Commands
VAISALA______________________________________________________________________ 333
7.30 Set Task Identification Information
(TASKID)
This command allows the user to "name" the (I,Q) data that are currently
being acquired by the RVP900. This naming information then becomes
associated with these data, and is available in the pulse information
structures (struct rvp900PulseInfo) that are read from the Timeseries API.
The iAqMode field of the pulse headers (struct rvp900PulseHdr) will be
incremented each time a TASKID opcode is received, but the continuous
flow of (I,Q) data from the RVP900/Rx card(s) will not be disturbed in any
way.
The TASKID command defines a 16-character Null-terminated name,
along with a 16-bit sweep number and 16-bit auxiliary (user defined)
number. You may use all sixteen characters of the name, as it is stored
internally in seventeen slots. The "Sweep Number" and "Scan Geometry"
(one of SCAN_xxx parameters) should be filled in with values best
approximating those notions. "Auxiliary Number" may be filled in with
any value that you find meaningful.
0916-179
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| | 0 0 0 1 0 1 1 1 1 1 1 1 | Command
|_______________|_______________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Sweep Number | Input 1
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Auxiliary (User Defied) Number | Input 2
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Name Byte–2 | Name Byte–1 | Input 3
|_______________________________|_______________________________|
.
.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Name Byte–16 | Name Byte–15 | Input 10
|_______________________________|_______________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| | Scan Geometry | XARG 1
|_______________________________|_______________________________|