Vaisala RVP900 User Manual

USER’S MANUAL__________________________________________________________________
364 _________________________________________________________________ M211322EN-D
C.2 Installation Check
Test Goal
Verify that the RVP900 is properly connected to the radar system and
document some of the basic radar characteristics. There are differences for
TWT/Klystron versus magnetron radar systems.
Test Procedure
For magnetron systems only, verify the following:
For Klystron or TWT systems only, verify the following:
Test Passed

Check that RVP901 Digital Receiver is properly connected to AC/DC
line voltage according to supplied power converter.

RVP901 mounted in the radar receiver cabinet or other convenient
location.

RVP901 IF input connection. IF Frequency ____________MHz.

RVP902 Signal Processor chassis installed in (circle
one): Rack Tabletop

Distance between RVP901 and RVP902 Chassis ____________

Check that CAT5E ethernet cable is connected to J2 ”Ethernet” of
RVP901 and other end is connected to ETH0 port of RVP902 server
chassis.

Verify trigger connections.

IF burst pulse connected to J13 ”ADC–E” of RVP901.

IF COHO is connected to J13 ”ADC–E” of RVP901.
Tx License Key Installed (circle one): Yes No
For Customer_________________________________ Date__________
For Vaisala___________________________________ Date__________

Vaisala RVP900 Specifications

General

Brand	Vaisala
Model	RVP900
Category	Receiver
Language	English