Appendix C _____________________________________________ Installation and Test Procedures
VAISALA______________________________________________________________________ 367
C.5 Setup "V" Command (Internal Status)
Test Goal
Verify that the TTY setups for the Internal Status section are properly
reported.
Special Test Equipment
- KVM installed
Reference
-See Section 4.1.2 V and Vz – View Card and System Status on page
100
Test Procedure
1. Enter the TTY setups through dspx.
2. Issue the "V" command to display the internal status.
Test Passed
Status information is correct per Section 4.1.2 V and Vz – View Card
and System Status on page 100 and shows no faults.
NOTE
We will record the final values of all the settings at the end of the
installation.
For Customer_________________________________ Date__________
For Vaisala___________________________________ Date__________
To Next Page
Loading...
Need help?
General