USER’S MANUAL__________________________________________________________________
444 _________________________________________________________________ M211322EN-D
E.7.2 Archive on Separate Archive Host
Utility Settings
E.8 TS Playback Using IRIS
Successful playback of time series data using IRIS takes some
configuration. First you must be running version 8.09 or later. Second,
make sure the following is configured in setup:
Ingest pop-up > Signal Processing and Data Storage
"Source of recorded angles" = "RVP Tags"
"Source of recorded time" = "RVP Tags"
General pop-up > Modes and Protocols
"Timezone for data recording" = "UTC"
General pop-up > Scanning Options
"Task Scheduling Control" = "Active/Passive" or "Passive"
"Passive type" = "TS–Playback"
Because IRIS sorts stored data by time and playback version number, it is
important to only playback the data once. In the Ingest Summary menu,
it displays a 2-digit number containing the playback version after the site
code. Original data with a playback version of zero, does not include the
number. The ingest filenames all have appended a "V" followed by the 2-
digit playback number.
To play back data:
1. Launch tsarchive on your RVP900 machine.
2. Click the TS Source button to launch the tsswitch GUI.
3. In tsswitch, select "Local Playback".
4. In the tsarchive Playback Options section, clear the Repeat button.
5. Set the Version to a unique non-zero value.
RVP900
TS Switch: Network
TS Archive: N/A
Archive Host
TS Switch: Local Archive
TS Archive: Play
To Next Page
Loading...
Need help?
General