Startup Procedure and Test Run
4
4.4 Keypad Operation
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference 165
9. When you are done changing the value, push .
The procedure to set the backlight to turn OFF automatically is complete.
â—† Show Information about the Bypass
The procedure in this section shows how to show the bypass model, maximum applicable motor output, rated output
current, software version, and the serial number on the keypad.
1. Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2. Push (Menu).
3. Push or to select [Diagnostic Tools], then push .
4. Push or to select [Bypass Information], then push .
The keypad will show the bypass information.
To Next Page
Loading...
Need help?
General