Cisco III - Supervisor Engine III User Manual

2-99
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
DATACORRUPTION Messages
CWTLC_RP-3
Error Message %CWTLC_RP-3-TMEM_IMPROPER_SEL: Improperly nested PXF [int] memory
select/deselect at nested level [int]. Value stored with select ([hex]) does not
match the value passed with deselect ([hex])
Explanation
The last Parallel Express Forwarding (PXF) select operation was not followed by a
deselect operation.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
DATACORRUPTION Messages
This section contains data corruption (DATACORRUPTION) messages.
DATACORRUPTION-1
Error Message %DATACORRUPTION-1-DATAINCONSISTENCY: [chars], -PC= [hex]
Explanation
The system has detected that some internal data structures may be corrupt. This
condition can lead to unpredictable device operation, including, but not limited to, unexpected
reloads or spurious memory accesses. This detection is a proactive check for operating system
consistency.
Recommended Action Note any other error messages or error symptoms that accompany this message.
Copy the error message exactly as it appears on the console or in the system log. Research and
attempt to resolve the error using the Output Interpreter
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the
Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance,
open a case with the Technical Assistance Center via the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the gathered information.
DHCP_SNOOPING Messages
This section contains Dynamic Host Configuration Protocol Snooping (DHCP_SNOOPING) messages.

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English