Cisco III - Supervisor Engine III User Manual

2-251
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
SW_VLAN Messages
SVCLC-4
Error Message %SVCLC-4-MINORTEMP: Module [dec] CPU[dec] has exceeded its normal
operating temperature. (current temp=[dec]C)
Explanation
The specified CPU on the specified service line card is too hot. The first [dec] is the
module number, the second [dec] is the CPU number, and the third [dec] is the temperature.
Recommended Action Determine if the environment is too hot. If the environment is not too hot,
replace the hardware.
Error Message %SVCLC-4-TEMPRECOVER: Module [dec] CPU[dec] has returned to its normal
operating temperature. (current temp=[dec]C)
Explanation
The specified service line card in the system has sent a thermal recovery event to the
supervisor engine. The first [dec] is the module number, the second [dec] is the CPU number, and
the third [dec] is the temperature.
Recommended Action No action is required.
SW_VLAN Messages
This section contains VLAN manager (SW-VLAN) messages.
SW_VLAN-4
Error Message %SW_VLAN-4-MAX_SUB_INT: The number of sub-interfaces allocated for
interface [chars] has exceeded recommended limits of [dec]
Explanation
The number of subinterfaces allocated for the interface has exceeded the recommended
limit.
Recommended Action Reduce the number of subinterfaces allocated for the interface to within the
recommended limit.
Error Message %SW_VLAN-4-VLAN_CREATE_FAIL: Failed to create VLANs [chars]: [chars]
Explanation
The VLANs specified in the error message could not be created. The VLAN manager
called a VLAN database routine to create one or more VLANs, but the PM failed to create the
requested VLANs. A possible cause of this error is that the VLANs already exist in the PM as
internal VLANs.
Recommended Action Determine the internal VLAN usage by entering the show vlan internal usage
command. Unconfigure the feature that occupies the internal VLAN, and retry the VLAN creation
operation. If this condition recurs, copy the message exactly as it appears on the console or in the
system log. Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English