2-192
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
PF_ASIC Messages
PBI_OPEN-4
Error Message %PBI_OPEN-4-ERROR_ALLOC: %Error: Can’t allocate [dec] bytes for pbi
data
Explanation
The system is unable to allocate the memory required to access the file.
Recommended Action Determine system memory usage, and retry the operation.
Error Message %PBI_OPEN-4-ERROR_OPEN: %Error: Can’t open [chars]
Explanation
The system is unable to open the file specified.
Recommended Action Ensure that the filename is correct. Enter the dir command to verify the
filename.
Error Message %PBI_OPEN-4-ERROR_READ: %Error: pbi file [chars] read failed
Explanation
An unknown error occurred while the system was copying the PBI program file to a
local buffer.
Recommended Action Enter the del [chars] command to remove the file. Use the copy command to
recopy the file from a known good source to its desired destination [chars]. If this message recurs,
copy the message exactly as it appears on the console or in the system log. Research and attempt to
resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some
messages, these tools and utilities will supply clarifying information. Search for resolved software
issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require
assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message %PBI_OPEN-4-ERROR_SIZE: %Error: Bad file size [chars]
Explanation
The file is too small or too large for a PBI program file.
Recommended Action Enter the dir command and verify the size of the file. Retry the operation.
PF_ASIC Messages
This section contains protocol filtering (PF_ASIC) messages.