Cisco III - Supervisor Engine III User Manual

2-190
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
OSM_MULTILINK Messages
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %OSM_MULTILINK-4-NUMLINKS: The bundle had an unexpected number of
links([dec]) in [chars]
Explanation
A software error occurred.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %OSM_MULTILINK-4-QUEUE_BUNDLE: Not able to queue the bundle ([chars]),
Num. of bundles [dec]
Explanation
A software error occurred while a bundle was being inserted in queue.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
OSM_MULTILINK-5
Error Message %OSM_MULTILINK-5-BUNDLEEXCEEDED: Bundle([chars]) cannot be associated
with link([chars]), max [dec]
Explanation
The number of bundles has exceeded the limit for the group belonging to the link. The
bundle specified in the error message will not work in distributed mode. If the module is CT3
(OSM-CT3 module), then ports 1 through 12 belong to one group. If the module is a CHOC-3
module (OSM-CHOC-DS0 module), then ports 1 through 4 belong to one group. If the module is a
CHOC-12 module (OSM-CHOC-DS0 module), then port 1 belongs to one group, and port 2 belongs
to the second group. Only 168 bundles can be supported per group. The new bundle created will
cause an extra load on the RP CPU.
Recommended Action Remove the multilink interface that is causing this condition.

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English