Cisco III - Supervisor Engine III User Manual

2-207
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
QM Messages
Error Message %POSLC-3-PROCESS_TIMEREVENT: [chars]
Explanation
An unexpected process timer event occurred on the OSM.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %POSLC-3-UNEXPECTED_PROCESSEVENT: [chars]
Explanation
An unexpected process event occurred on the OSM.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
QM Messages
This section contains Quality of Service Management (QM) messages.
QM-2
Error Message %QM-2-PLC_ATTACH_REJECT_2_PLCRS: Command rejected: (policy [chars]
interface [chars] dir [chars]) police and police aggregate commands present in
same traffic class
Explanation
This message indicates one of two conditions: either a policy map that contains a traffic
class with both police and police aggregate commands is attached to an unsupported interface or a
policy attached to an interface is being modified in an unsupported manner.
Recommended Action Remove the unsupported command combination from the same traffic class. In
the case of a modification to a policy that is already attached to unsupported interfaces, no action is
required because the command is automatically rejected.

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English