2-17
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
C6K_PROCMIB Messages
C6K_POWER-4
Error Message %C6K_POWER-4-PD_NOLINKUP: The device connected to [dec]/[dec] is
powered up but its link is not up in [dec] seconds. Therefore, power is withdrawn
from the port.
Explanation
The system withdrew the power that was allocated to the specified port because the port
link was not operational in the specified number of seconds.
Recommended Action Try to connect the device to a different port or connect a different device to the
port specified in the message.
C6K_POWER-6
Error Message %C6K_POWER-6-NOLPP: Because of lack of system power, devices that
require the system to power them on may not come up within one second.
Explanation
The local power pools have been deallocated. The module firmware cannot power up
the device until it has received authorization for power allocation from the software running on the
supervisor engine.
Recommended Action No action is required.
C6K_PROCMIB Messages
This section contains Catalyst 6500 series switch and Cisco 7600 series router Process MIB SP CPU
(C6K_PROCMIB) messages.
C6K_PROCMIB-3
Error Message %C6K_PROCMIB-3-IPC_PORTOPEN_FAIL: Failed to open port while connecting
to process statistics: error code = [chars]
Explanation
An error occurred during an attempt to open a port for an IPC message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
To Next Page
Loading...
Need help?
General