Cisco III - Supervisor Engine III User Manual

2-221
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
SIBYTE_ION
Error Message %SFF8472-3-THRESHOLD_VIOLATION: [chars]: [chars]; Operating value:
[chars], Threshold value: [chars].
Explanation
There has been a threshold violation. The violation is specified in the message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %SFF8472-3-UNEXPECTEDEVENT: Process received unknown event (maj [hex],
min [hex]).
Explanation
A process can register to be notified when various events occur. A process received an
event that it did not know how to handle.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
SIBYTE_ION
This section contains Sibyte Ion messages.
SIBYTE_ION-3
Error Message %SIBYTE_ION-3-SB_THREAD_CTL_ERR: Call to ThreadCTL() failed: function
= [chars], line number = [dec], return_code = [dec], errno = [dec]
Explanation
A QNX call to ThreadCTL() failed. [chars] is the function, the first [dec] is the line
number, the second [dec] is the return code, and the third [dec] is the error number.
Recommended Action Copy the error message exactly as it appears on the console or in the system
log. Research and attempt to resolve the error using the Output Interpreter
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the
Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance,

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English