2-319
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
WiSM Messages
WCCP-3
Error Message %WCCP-3-BADACE: Service [chars], invalid access-list entry (seq:[dec]
reason:[chars])
Explanation
The access control list (ACL) associated with the specified WCCP service contains an
incompatible entry. The hardware cannot process the resultant merged access list and will fall back
to software-based NetFlow switching.
Recommended Action Remove or change the incompatible entry in the ACL.
WiSM Messages
This section contains wireless service module (WiSM) messages.
WiSM-3
Error Message %WiSM-3-PORTCHANNEL: Portchannel allocation failed for module [dec].
Explanation
The system is unable to allocate enough port channel groups for the WiSM card. [dec]
is the module number.
Recommended Action If this message recurs, copy the error message exactly as it appears on the
console or in the system log. Research and attempt to resolve the error using the Output Interpreter
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the
Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance,
open a case with the Technical Assistance Center via the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the gathered information.
To Next Page
Loading...
Need help?
General