2-6
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
ATMSPA Messages
ATMSPA Messages
This section contains ATM Shared Port Adapter (ATMSPA) messages.
ATMSPA-2
Error Message %ATMSPA-2-INITFAIL: [chars] - Init Failed return code: [int]
Explanation
The SPA failed to complete hardware initialization. One of the devices in the SPA failed
to initialize successfully. Information about the failed device is specified in the message text on the
console or in the system log.
Recommended Action Power down and reseat the indicated SPA card. If the condition persists, copy
the message exactly as it appears on the console or in the system log. Research and attempt to
resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some
messages, these tools and utilities will supply clarifying information. Search for resolved software
issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require
assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the information you have gathered. Attach the
following information to your case in nonzipped, plain-text (.txt) format: the output of the show
logging and show tech-support commands and your pertinent troubleshooting logs.
ATMSPA-3
Error Message %ATMSPA-3-DATA_ERROR: [chars] Error [hex] [chars]
Explanation
A data path protocol violation or sequence error has been detected. The message text on
the console or in the system log provides more information about the specific nature of the error.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
To Next Page
Loading...
Need help?
General