Cisco III - Supervisor Engine III User Manual

2-123
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
EM Messages
EM-4
Error Message %EM-4-AGED: The specified EM client (type=[dec], id=[dec]) did not
close the EM event within the permitted amount of time ([dec] msec).
Explanation
A timeout occurred. This condition is minor and should not affect the functionality of
the switch.
Recommended Action Copy the error message exactly as it appears on the console or in the system
log. Enter the show em state command to gather data that may help identify the nature of the error.
If you cannot determine the nature of the error from the error message text or from the show em
state output, contact your Cisco technical support representative and provide the representative with
the gathered information.
Error Message %EM-4-INVALID: The specified EM function ([chars]) received Invalid
operands <[dec]>.
Explanation
The EM client used invalid API parameters.
Recommended Action Copy the error message exactly as it appears on the console or in the system
log. Enter the show em state command and the show em status command to gather data that may
help Cisco technical support to identify the nature of the error. Contact your Cisco technical support
representative and provide the representative with the gathered information.
Error Message %EM-4-LIMIT: EM exceed open events limit ([dec]).
Explanation
The EM has exceeded the permitted number of open events. The open event limit is
5000.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %EM-4-NOTUP: The EM is not available ([chars]).
Explanation
The EM is not available because some basic initialization failed. This condition might
be caused by failure of a basic infrastructure functionality or a memory corruption.
Recommended Action Copy the error message exactly as it appears on the console or in the system
log. Enter the show em state command and the show em status command to gather data that may
help Cisco technical support to identify the nature of the error. Contact your Cisco technical support
representative and provide the representative with the gathered information.

Cisco III - Supervisor Engine III Specifications

General

Brand	Cisco
Model	III - Supervisor Engine III
Category	Software
Language	English