2-106
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
EARL Messages
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
EARL-2
Error Message %EARL-2-PATCH_INVOCATION_LIMIT: [dec] Recovery patch invocations in
the last 30 secs have been attempted. Max limit reached
Explanation
The system attempted the EARL recovery for the maximum number of times that are
permitted in the last 30 seconds.
Recommended Action The module has been automatically reset instead of attempting recovery.
Error Message %EARL-2-SWITCH_BUS_IDLE: Switching bus is idle for [dec] seconds
Explanation
The EARL did not switch any packets on the EARL bus. A recovery mechanism will
attempt to fix the problem. The system reloads if the problem cannot be corrected.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %EARL-2-SWITCH_BUS_STALL: Switching bus stall detected. Backplane bus
stall status: [dec]
Explanation
The EARL did not switch any packets on the EARL bus. A recovery mechanism will
attempt to fix the problem. The system reloads if the problem cannot be corrected.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
To Next Page
Loading...
Need help?
General