2-180
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
MROUTE Messages
Error Message %MRIB_PROXY-2-MRIB_LC_FETCH_FAIL: LC in slot [dec] failed to send an
RPC fetch request to the RP: [chars]
Explanation
The line card attempted to read multicast route updates from the route processor, but the
RPC request failed. The line card MFIB state might now be inconsistent or frozen.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
MROUTE Messages
This section contains MROUTE messages.
MROUTE-3
Error Message %MROUTE-3-IGMP_NOT_FOUND: IGMP group [IP address] to delete from
interface [chars] not found in VRF [chars]
Explanation
The group to be deleted from the interface could not be found in the IGMP cache for the
VRF. [IP address] is the IP address in the IGMP group, the first [chars] is the interface, and the
second [chars] is the VRF.
Recommended Action An inconsistency in maintaining the IGMP cache occurred. Copy the error
message exactly as it appears on the console or in the system log. Research and attempt to resolve
the error using the Output Interpreter
https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the
Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance,
open a case with the Technical Assistance Center via the Internet
http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support
representative and provide the representative with the gathered information.
MSFC2 Messages
This section contains Multilayer Switch Feature Card 2 (MSFC2) messages.
To Next Page
Loading...
Need help?
General