2-197
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
OL-11469-02
Chapter 2 Messages and Recovery Procedures
PIMSN Messages
PFREDUN-7
Error Message %PFREDUN-7-KPA_WARN: RF KPA messages have not been heard for [dec]
seconds
Explanation
The RF KPA messages have not been sent from the peer for the specified numbers of
seconds. This message is printed after every third KPA timer expiry.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
PIMSN Messages
This section contains PIM (Protocol Independent Multicast) Snooping (PIMSN) messages.
PIMSN-6
Error Message %PIMSN-6-IGMPSN_GLOBAL: PIM Snooping global runtime mode [chars] due
to IGMP Snooping [chars]
Explanation
PIM snooping requires that IGMP snooping be enabled. When IGMP snooping is
disabled, PIM snooping also becomes disabled. PIM snooping is reenabled when IGMP snooping is
reenabled.
Recommended Action No action is required. The system is working properly. We recommend that you
leave IGMP snooping enabled.
Error Message %PIMSN-6-IGMPSN_VLAN: PIM Snooping runtime mode on vlan [dec] [chars]
due to IGMP Snooping [chars]
Explanation
PIM snooping requires that IGMP snooping be enabled. When IGMP snooping is
disabled, PIM snooping also becomes disabled. PIM snooping is reenabled when IGMP snooping is
reenabled.
Recommended Action No action is required. The system is working properly. We recommend that you
leave IGMP snooping enabled.
To Next Page
Loading...
Need help?
General