DataCard SD260 User Manual

162 How-To Topics
16. Replace the ribbon cartridge and close the printer. The printer is ready to
print cards again.
17. Discard the used cleaning card and cleaning sleeve.
Clean the Printhead
1. Begin with the printer powered off.
2. Open the printer cover and remove the print ribbon
cartridge.
3. O
pen the cleaning pen.
4. Using gentle pressure, move the clea
ning pen back
and forth along the full length of the printhead edge
until it is completely clean.
5. Replace the print ribbon cartridge and close the
printer cover.
6. Power on the printer.
7. Print a sample card to verify the quality of
printing.
H
INTS & TIPS
• Avoid touching the printhead edge with your
fingers.
• Avoid touching t
he printing edg
e of the printhead
cartridge with any sharp objects which can
permanently damage the printhead.
• Only use the cleaning pen to clean the
printhea
d. Other materials can stick to the
printhead.
• Use the cleaning pen up to 8 times, and then
replace it.

DataCard SD260 Specifications

General

Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Color	Yes
Print speed (color)	200 card/h
Product color	Blue, Grey

Weight and Dimensions

Depth	391 mm
Width	175 mm
Height	224 mm