DataCard SD260 User Manual

90 Using the Printer
• Change the cleaning sleeve each time you clean the printer or change the print
ribbon.
• You can also clean
the printhead. See “Clean the printhead” for the steps to
follow.
Clean the printhead
Clean the printhead when you notice unprinted lines on the finished card. This
usually indicates dirt or contamination on the printhead. Clean the printhead
after replacement or if it has been accidently touched. The oils from hands could
affect print quality.
1. Be
gin with the printer powered off.
2. Open the printer cover and remove the print ribbon cartridge.
3. Open the cleaning pen.
4. Using gentle pressure, move the cleaning pen
back and forth along the full length of the
printhead edge until it is completely clean.
5. Replace the print ribbon cartridge and close the
printer cover. Avoid
bumping printhead when
installing the print ribbon cartridge.
6. Power on the printer.
7. Print a sample card to verify the quality of pr
inting.

DataCard SD260 Specifications

General

Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Color	Yes
Print speed (color)	200 card/h
Product color	Blue, Grey

Weight and Dimensions

Depth	391 mm
Width	175 mm
Height	224 mm