85
Printer Driver Messages
The driver can create and display the following messages.
500: The printer is not available. The card cannot print.
The driver cannot communicate with the printer. Make
sure the printer is powered on and connected to the PC.
1. Connect the power cord. Use the power switch to
power on
the printer.
2. Connect the cables from the PC to printe
r.
Use either a USB cable OR a network cable, not
both.
3. Ma
ke sure all connections are complete.
4. Ask network support for help, if needed.
HIN
TS & TIPS
• Make sure you have chosen the correct pr
inter in the application.
• Ask the Manager for assistance if needed.
501: The printer connection was lost. Printing the card is canceled.
The printer connection was lost. Printing the card is
canceled.
To print the card, make sure the printer is powered
on
and connected to the PC
.
1. C
onnect the power cord. Use the power switch to
power on
the printer.
2. C
onnect the cables from the PC to printe
r.
3. Use either a USB cable OR a network cable, not both.
4. Make sure all connections are complete.
5. Ask network support for help, if needed.
If this message is followed by “101: Job could not complete”, clear
message 101 at the printer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
