DataCard SD260 User Manual

169
3. Load a full roll of print ribbon onto the
spindle closest to the cartridge handle.
4. Place the empty spool on the spindle
with the black gear.
5. Wind the empty spool
counter-
clockwise one full
turn.
Load Cleaning Roller
Load a new cleaning roller with each
new roll of print ribbon.
The printer ships with the cleaning
roller spindle installed on the print
ribbon cartridge.
1. Remove the cleaning roller
spindle from the ribbon cartridge
and slid
e the continuous cleaning
sleeve onto the spindle (a).
2. Snap the spindle with sleeve
installed back onto the ribb
on cartridge (b).
3. Remove the protective wrapper
from the cleani
ng sleeve (c).
Install Ribbon Cartridge
Install the assembled print ribbon
cartridge into the printer.
1. Hold the
print ribbon cartridge by the
handle and lower
into the printer
with the handle toward the front of
the printer.
2. Check to see that the ribbon cartridge
is correctly posi
tioned in the guides.

DataCard SD260 Specifications

General

Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Color	Yes
Print speed (color)	200 card/h
Product color	Blue, Grey

Weight and Dimensions

Depth	391 mm
Width	175 mm
Height	224 mm