DataCard SD260 User Manual

189
Set IP Address Type
The Address Mode determines how the network address of the printer is
assigned. The choices are DHCP and Static IP.
DHCP stands for “Dynamic Host Configuration Protocol” and means that the
network
assigns the IP Address to the printer. The printer is set to DHCP in the
factory. See “Get the Printer Network IP Address” if you use DHCP
addressing.
Static IP means that the IP Address is assigned, usually by your network support
personn
el. If the IP Address is assigned, then the Subnet Mask, and Gateway
Address are assigned also.

DataCard SD260 Specifications

General

Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Color	Yes
Print speed (color)	200 card/h
Product color	Blue, Grey

Weight and Dimensions

Depth	391 mm
Width	175 mm
Height	224 mm