DataCard SD260 User Manual

60 Install the Printer
Setup a Printer Pool, Windows XP and Windows Server 2003 (32-bit)
1. Install the printer:
A. To install the printer using the driver CD, see “Network Installation
using the Installation CD”
B. To install the printer using a downloaded driver, see “Network
Installation using a downloaded driver”.
2. Connect each printer that will be included in the pool to the network using an
Ethernet cable.
3. Write down the IP address of each printer. See “Retrieve the Printer IP
Address” for the steps to follow.
4. Configure for Printer Pooling:
A. Open Printer
Properties. For more
information see “Open
Printer Properties”.
B. Click the Add Port…
button on the Ports tab.
C. Click once on the Standard
TCP/IP Port to select it and
then click the New Port...
button.
D. Click Next.

DataCard SD260 Specifications

General

Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Color	Yes
Print speed (color)	200 card/h
Product color	Blue, Grey

Weight and Dimensions

Depth	391 mm
Width	175 mm
Height	224 mm