DataCard SD260 User Manual

45
• Install magnetic stripe fonts if the
client PCs will be processing magnetic
stripe cards.
• Copy the printer
doc
umentation folder to each client PC.
• Install the ID Works XPS Card Printer Plug-in, if necessary.
3. Configur
e the Client PC:
Settings on the client PC, such as
ribbon type and print resolution, must be
configured to match the settings of the host PC. The client PC will not
automatically detect the type of ribbon installed in the printer; instead it will
default to YMCKT ribbon and 300 x 300 dpi resolution. Follow these steps to
change the default settings:
A. Set Ribbon Type:
a. Open Printing Preferences for the shared printer.
b. C
lick the Layout tab and then click the Advanced… button.
c. Select the type of ribbon from the Ribbon Type drop-down list.
d. Click the Apply bu
tt
on.
e. Close Printing Preferences.
B. Set Print Resolution:
a. Open Printing Properties for the shared printer.
b.
Cl
ick the Print Mode tab.
c. Select the resolution from the Color an
d Monochrome drop-down
lists.
d. Click the Apply button and then close Printing Preference
s.
e. For more information about print resolution, see “Set the Pr
int
Resolution”.

DataCard SD260 Specifications

General

Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Color	Yes
Print speed (color)	200 card/h
Product color	Blue, Grey

Weight and Dimensions

Depth	391 mm
Width	175 mm
Height	224 mm