Fujitsu PRIMERGY TX100 S3 Maintenance Manual

230 Upgrade and Maintenance Manual TX100 S3
Processor
11.2.7.2 Installing the processor heat sink type B
Figure 143: Installing the processor heat sink type B (A)
Ê Carefully seat the heat sink on the four threaded holes as shown.
V CAUTION!
– Ensure that the screws on the heat sink are properly seated on the
threaded holes (see circles).
– Ensure that the heat sink cooling fins match the direction of the
airflow!

Fujitsu PRIMERGY TX100 S3 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3
Category	Server
Language	English