Fujitsu PRIMERGY TX100 S3 Maintenance Manual

274 Upgrade and Maintenance Manual TX100 S3
Front panel and external connectors
13.1.2 Preliminary steps
Before replacing the front panel cable, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 69.
Ê Shut down the server as described in section "Shutting down the server" on
page 42.
Ê Remove the AC power cord from the cable tie and disconnect it from the
system as described in section "Disconnecting power cord" on page 43.
Ê Bring the server to its horizontal position.
Ê Open the side cover as described in section "Removing the side cover" on
page 45.
Ê Remove the HDD cage as described in section "Removing the HDD cage"
on page 61.
Ê Remove all accessible drives as described in section "Removing accessible
drives" on page 257.
Ê Remove the front cover as described in section "Removing the front cover"
on page 51.

Fujitsu PRIMERGY TX100 S3 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3
Category	Server
Language	English