EasyManuals Logo
Home>HP>Storage>StorageWorks 6400/8400 - Enterprise Virtual Array

HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

HP StorageWorks 6400/8400 - Enterprise Virtual Array
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
Operating system and multipath support
The MPX200 Multifunction Router is supported using FCIP with all operating systems and multipath
software supported by HP for Continuous Access EVA. For more information, see the HP StorageWorks
SAN design reference guide, available at http://www.hp.com/go/SDGManuals.
EVA storage system rules and guidelines
The MPX200 Multifunction Router configured for FCIP is supported for use with the following HP
Continuous Access EVA storage systems:
EVA4400/4400 with embedded switch
EVA4000/4100/6000/6100/8000/8100
EVA6400/8400
EVA3000/5000
The MPX200 Multifunction Router is supported for use in all HP-supported HP Continuous Access
EVA configurations, including the standard two-fabric, five-fabric, and six-fabric configurations.
HP Continuous Access EVA supports RCS and non-RCS LUNs with FCIP extension.
HP MPX200 Multifunction Router supports the minimum IP bandwidth/maximum DR groups.
Table 14 specifies the minimum IP bandwidth and maximum EVA DR groups for EVA XCS and VCS.
Table 14 Minimum IP bandwidth and maximum DR groups
Minimum IP bandwidth and maximum DR groups
1
Gateway pair
Single or shared IP link latency (0 to
100 ms one-way)
Dual fabric latency (0 and 100 ms
one-way)
Minimum: At least 4 Mb/s for 1 DR
group Recommended: At least 10
Mb/s for 1 to 5 DR groups
Minimum: At least 2 Mb/s for 1
DR group Recommended: At least
5 Mb/s for 1 to 5 DR groups
MPX200 Multifunction Router
(MPX200)
1
Gb/s IP bandwidth can have up to 128 DR groups with VCS 4.x, and up to 256 DR groups with XCS.
EVA storage system software
The MPX200 Multifunction Router is supported with current EVA storage software applications such
as HP Continuous Access EVA, Command View EVA, Business Copy, SSSU, and Replication Solutions
Manager.
Fibre Channel switch and firmware support
The MPX200 is compatible with the following Fibre Channel switches:
B-series 8 Gb/s, 4 Gb/s, and 2 Gb/s Fibre Channel switches
C-series 8 Gb/s, 4 Gb/s, and 2 Gb/s Fibre Channel switches
NOTE:
For current support, see SPOCK at http://www.hp.com/storage/spock. You must sign up for an HP
Passport to enable access.
MPX200 FCIP126

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StorageWorks 6400/8400 - Enterprise Virtual Array and is the answer not in the manual?

HP StorageWorks 6400/8400 - Enterprise Virtual Array Specifications

General IconGeneral
BrandHP
ModelStorageWorks 6400/8400 - Enterprise Virtual Array
CategoryStorage
LanguageEnglish

Related product manuals