HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

set features
Syntax
Set iSCSI
Configures an iSCSI port.
Admin sessionAuthority
[<PORT_NUM>]
set isc-
si
Syntax
The number of the iSCSI port to be configured.
[<PORT_NUM>]
Keywords
Example:
MPX200 <1>(admin) #> set iscsi 1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring iSCSI Port: 1
---------------------------
Port Status (0=Enable, 1=Disable) [Enabled ]
Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto ]
MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal ]
Window Size (Min=8124B, Max=1048576B) [65536 ]
IPv4 Address [10.3.5.205 ]
IPv4 Subnet Mask [255.255.255.0 ]
IPv4 Gateway Address [0.0.0.0 ]
IPv4 TCP Port No. (Min=1024, Max=65535) [3260 ]
IPv4 VLAN (0=Enable, 1=Disable) [Disabled ]
IPv6 Address 1 [:: ]
IPv6 Address 2 [:: ]
IPv6 Default Router [:: ]
IPv6 TCP Port No. (Min=1024, Max=65535) [3260 ]
IPv6 VLAN (0=Enable, 1=Disable) [Disabled ]
iSCSI Header Digests (0=Enable, 1=Disable) [Disabled ]
iSCSI Data Digests (0=Enable, 1=Disable) [Disabled ]
All attribute values for Port 1 that have been changed will now be saved.
Set iSNS
Configures the blade's iSNS parameters.
Admin sessionAuthority
set isns
Syntax
Example:
MPX200 <2>(admin) #> set isns
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
Command referencecommand reference282

HP StorageWorks 6400/8400 - Enterprise Virtual Array Specifications

General

Brand	HP
Model	StorageWorks 6400/8400 - Enterprise Virtual Array
Category	Storage
Language	English