Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Set CHAP
Configures the CHAP parameters.
Admin sessionAuthority
set chap
Syntax
Example:
MPX200 <1>(admin) #> set chap
A list of attributes with formatting and current values will follow. Enter a
new value or simply press the ENTER key to accept the current value. If you
wish to terminate this process before reaching the end of the list press 'q' or
'Q' and the ENTER key to do so.
Index iSCSI Name
----- ----------
0 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0
1 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.1
2 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9
3 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9
4 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070ce9
5 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070ce9
6 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070cec
7 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070cec
8 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070cec
9 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070cec
Please select a presented target from the list above ('q' to quit): 2
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value. If
you wish to terminate this process before reaching the end of the list press
'q' or 'Q' and the ENTER key to do so.
CHAP (0=Enable, 1=Disable) [Disabled] 0
CHAP Secret (Max = 100 characters) [ ] ****
All attribute values that have been changed will now be saved.
Set chassis
Sets the chassis name.
Admin sessionAuthority
set chassis
Syntax
Example:
MPX200 <1>(admin) #> set chassis
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Command referencecommand reference280