NoneAuthority
show initiators_lunmask
Syntax
Example:
MPX200 <1>#> show initiators_lunmask
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 iqn.1991-05.com.microsoft:server1
Please select an Initiator from the list above ('q' to quit): 0
Target(WWPN) (LUN/VpGroup) VendorId
------------ ------------- --------
21:00:00:11:c6:17:12:22 0/VPGROUP_1 SEAGATE
50:06:01:60:3a:60:0a:63 0/VPGROUP_2
50:06:01:60:3a:60:0a:63 1/VPGROUP_2
50:06:01:60:3a:60:0a:63 2/VPGROUP_2
50:06:01:60:3a:60:0a:63 3/VPGROUP_2
50:06:01:60:3a:60:0a:63 4/VPGROUP_2
50:06:01:60:3a:60:0a:63 5/VPGROUP_2
50:06:01:60:3a:60:0a:63 6/VPGROUP_2
50:06:01:60:3a:60:0a:63 7/VPGROUP_2
50:06:01:60:3a:60:0a:63 8/VPGROUP_2
Show iSCSI
Displays iSCSI information for the specified port. If you do not specify a port, the command displays
all ports.
NoneAuthority
[port_num]
show
iscsi
Syntax
The number of the iSCSI port.
[port_num]
Keywords
Example:
MPX200 <1>(admin) #> show iscsi
iSCSI Port Information
------------------------
iSCSI Port GE1
Port Status Enabled
Link Status Up
iSCSI Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0
Firmware Revision 3.00.01.57
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
MTU Size Jumbo
Window Size 32768
MAC Address 00-c0-dd-13-16-44
IPv4 Address 33.33.50.96
IPv4 Subnet Mask 255.255.0.0
IPv4 Gateway Address 0.0.0.0
IPv4 Target TCP Port No. 3260
IPv4 VLAN Disabled
IPv6 Address 1 2000:33::37:96:1
Command referencecommand reference292