HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

NOTE:
HP recommends that you set a static IP address on the management port to ensure connectivity.
After the discovery is complete, the MPX200s appear in the iSCSI Devices folder as iSCSI Controller
01 and iSCSI Controller 02. The four iSCSI MPX200 hosts appear in the Hosts folder (see Figure 18).
The ports associated with each host consist of the VPGs from each blade.
Figure 18 Host properties
.
In the IPv4 or IPv6 box, select Static and set the management port’s IP address.
Figure 19 shows the Management Port tab on the iSCSI Controller Properties page.
Managing the MPX200 using HP Command View EVA40

HP StorageWorks 6400/8400 - Enterprise Virtual Array Specifications

General

Brand	HP
Model	StorageWorks 6400/8400 - Enterprise Virtual Array
Category	Storage
Language	English