Table 36 FCIP log messages
Description
Mes-
sage
type
Mod-
ule
type
Log MessageID
A VP logs in to a device, but the device rejects
the login.
InfoFC
#%d: QLTimer: VP %d dis-
cover a reject device PID
%02x%02x%02x
119144
Update Nvram for the invalid Serial Link
Control for Mez platform.
InfoFC
#%d: QLFlashGetNvram: In-
valid Serial Link Control
0x%x for port %d
120278
Memory resources could not be allocated to
an FCIP route. The route was not created. The
router must be rebooted to clear this error.
ErrorUser
FcipRoute#%d Failed with
Memory Allocation Error
139930
Invalid argument specified by user. The preced-
ing message in the log indicates which para-
meter is in error.
ErrorUser
FcipRoute#%d Failed with
Invalid Arg Error
139931
Specified route or port (FC/Ethernet) does not
exist. Verify that the value entered is valid.
ErrorUser
FcipRoute#%d Failed with
Unknown Device Error
139932
Invalid memory address was encountered
while reading, writing, or modifying FCIP route
definition. Reboot the router.
ErrorUser
FcipRoute#%d Failed with
Kernel Error
139933
Network device configuration failed; could not
add or remove a network device instance.
Verify the IP addresses, mask, gateway, and
Ethernet port specified in the route definition.
ErrorUser
FcipRoute#%d Failed with
Network Configuration Er-
ror
139934
Read of FCIP Route definition from persistent
memory failed. Reboot the router.
ErrorUser
FcipRoute#%d Failed with
Persistence Read Failure
139935
Write of FCIP Route definition to persistent
memory failed. Retry the route; add or modify
if the retry failed reboot the router.
ErrorUser
FcipRoute#%d Failed with
Persistence Write Failure
139936
Specified IP Address is already in use in anoth-
er FCIP route definition. Verify that the address
specified in the definition is correct. If you want
to reuse the address you will have to remove
it from the other route definition first.
ErrorUser
FcipRoute#%d Failed with
IP Address Reuse Error
139937
Router is not licensed for FCIP. Contact your
sales representative for information on how to
obtain a license.
ErrorUser
FcipRoute#%d Add Failed
because relevant FCIP Li-
cence not available
139938
This is an informative message not an error.
The message indicates that an FCIP was re-
moved or modified.
ErrorFCIP
FcipRoute#%d: Cleaning
FCIP Instance
172040
Connectivity with the remote peer has been
interrupted. Check the Ethernet cabling and
path to the remote peer.
ErrorFCIP
FcipRoute#%d: Did not get
the keepalive msg form
remote peer
172231
Log messageslog messages352
To Next Page
Loading...
Need help?
General