2. Click Modify to make changes. See Figure 64 on page 99.
3. Click Done to finish.
Figure 64 iSCSI Persistent Reservation Setup
.
Each cluster is required to have its own value, and each node of a single cluster must have its own
value. For example, Cluster A could have the default setting of AABBCCCCBBAA. The following
table shows possible node settings.
Last byte valueNode
1Node 1
2Node 2
3Node 3
4Node 4
The HP Full Featured DSM for EVA
When the HP Full Featured DSM for EVA is installed, it sets up Persistent Reservation in the registry
by default. For more information on the HP DSM, see
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&
lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492
Microsoft Cluster Server for Windows 2008
iSCSI Failover clustering is supported on the HP StorageWorks MPX200 Multifunction Router. For
more information, see http://technet.microsoft.com/en-us/library/cc754482.aspx.
MPX200 Multifunction Router 99
To Next Page
Loading...
Need help?
General