Keithley 2500 User Manual

Model 2500 and 2502 User’s Manual Getting Started 1-17
Table 1-3
Factory default settings
Setting* BENCH default GPIB default
A/D Controls:
Auto-zero
Line frequency
Data Store
Digital output size**
Display digits
Display mode
Filter:
Average mode, state*
Average filter count*
Advanced state, tol. *
Median filter rank, state*
GPIB address
Ground connect
Limit tests:
DigOut:
Size
Mode:
Binning control
Auto clear:
Delay
Clear pattern**
H/W limits (1 and 2):
Control
Fail mode:
Digital I/O pattern*
S/W limits (3 to 6):
Control
Low limit:
Low pattern**
High limit:
High pattern**
Feed
Pass pattern**
EOT Mode
Math function and units:
M factor (gain)
B factor (slope)
State
On
No effect
No effect
15 or 7
5.5
Dual-channel
Off
Repeat, disabled
10
Off, 5%
0, Off
No effect
Disabled
4-bit
Grading
Immediate
Disabled
0.00001 sec
15 or 7
Disabled
In compliance
15 or 7
Disabled
-1.0
15 or 7
+1.0
15 or 7
Channel 1 measure
15 or 7
EOT
MX +B, MXB
1
0
Disabled
On
No effect
No effect
15 or 7
5.5
Dual-channel
Off
Repeat, disabled
10
Off, 5%
0, Off
No effect
Disabled
4-bit
Grading
Immediate
Disabled
0.00001 sec
15 or 7
Disabled
In compliance
15 or 7
Disabled
-1.0
15 or 7
+1.0
15 or 7
Channel 1 measure
15 or 7
EOT
MX + B, MXB
1
0
Disabled
* Settings are for both channel 1 and channel 2.
** 15 if digout size is 4-bit, 7 if digout size is 3-bit.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

Keithley 2500 Specifications

General

Brand	Keithley
Model	2500
Category	Measuring Instruments
Language	English