17-8 SCPI Command Reference Models 2500 and 2502 User’s Manual
Table 17-2
DISPlay command summary
Command Description
Default
parameter SCPI
:DISPlay
:ENABle <b>
:ENABle?
:MODE <name>
:MODE?
[:WINDow[1]]
:TEXT
:DATA?
:STATe <b>
:STATe?
:DATA?
:ATTRibutes?
:WINDow2
:TEXT
:DATA?
:STATe <b>
:STATe?
:DATA?
:ATTRibutes?
:DIGits<n>
:DIGits?
Turn on or turn off front panel display.
Query state of display.
Select display function. Name = CALC3,
CALC4, CALC5, CALC6, or DUAL.
Query selected display function.
Path to locate message to bottom display:
Control user test message:
Define ASCII message “a” (up to 32 characters).
Query text message.
Enable or disable message mode.
Query text message state.
Query data on bottom portion of display.
Query attributes of message characters: blinking (1)
or not blinking (0).
Path to locate message to bottom display:
Control user test message:
Define ASCII message “a” (up to 32 characters).
Query text message.
Enable or disable message mode.
Query text message state.
Query data on bottom portion of display.
Query attributes of message characters: blinking (1)
or not blinking (0).
Specify display resolution (4 to 7).
Query display resolution.
Note 1
DUAL
Note 2
Note 3
Note 2
Note 3
6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Notes:
1. *RST and :SYSTem:PRESet has no effect on the display circuitry. Pressing LOCAL or cycling power enables (ON) the display
circuit.
2. *RST and :SYSTem:PRESet has no effect on a user-defined message. Pressing LOCAL or cycling power cancels all user-defined
messages.
3. *RST and :SYSTem:PRESet has no effect on the state of the message mode. Pressing LOCAL or cycling power disables (OFF) the
message mode.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
