Models 2500 and 2502 User’s Manual SCPI Command Reference 17-49
SOURce3 <name>
:FORMat:SOURce3 <name> Set SOUR3 and TTL response formats
Parameters <name> = ASCii ASCII format
HEXadecimal Hexadecimal format
OCTal Octal format
BINary Binary format
Query :SOURce3? Query response format
Description This command controls the response format for all
CALC7:XXXX:SOUR3 and SOUR3:TTL queries in a manner similar
to formats set by the FORM:SREG command. See “Calculate sub-
systems,” and “SOURce subsystem,” page 17-60, topics for details.
CALC data elements
CALCulate <item list>
:FORMat:ELEMents:CALCulate <item list> Set CALC data elements
Parameters <item list> = CALCulate Include CALC1 to CALC7 data
TIME Include timestamp
STATus Include status information
NOTE Each item in the list must be separated by a comma (for example, :CALCulate
CALC,TIME,STAT).
Query :CALCulate? Query CALC data element list
Description This command allows you specify the data elements returned with the
CALC1:DATA? through CALC7:DATA? queries. With CALC speci-
fied, the corresponding CALC1 through CALC7 element will be
included in the response. With TIMe or STATus specified, timestamp
and status information will be returned with the queries. See “Calculate
subsystems,” page 17-22, for a complete description of the various
CALC1 through CALC7 elements. See also “Data elements,”
page 17-46, for a description of TIME and STATus information.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
