2
Connections
• Connection precautions — Summarizes precautions that should be observed when
making test connections to the Model 2500.
• INPUT and OUTPUT connectors — Shows the locations of the triax INPUT jacks
used for photodiode measurements and the OUTPUT jacks used to apply the voltage
bias to the photodiodes.
• Connector terminals — Details the terminal configuration of the triax INPUT con-
nectors and the OUTPUT jacks.
• Output enable — Briefly covers the output enable circuit, which can be used to inhibit
the voltage sources with external switching.
• Photodiode connections — Provides detailed diagrams for connecting the
Model 2500 INPUT and OUTPUT connectors to the photodiodes in a laser diode test
system.
• Alternate connecting methods — Provides connecting diagrams for using the
Model 2500 as a stand-alone ammeter or stand-alone voltage source.
• Analog output connections (Model 2502 only) — Summarizes connections to the
analog outputs and gives equivalent circuits.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
