MAN B&W 5.05
Page 1 of 1
MAN Diesel
198 47 158.3MAN B&W MC/MCC, ME/MEC/MEGI/ME-B engines
Engine Outline, Galleries and Pipe Connections
Engine outline
The total length of the engine at the crankshaft
level may vary depending on the equipment to
be fitted on the fore end of the engine, such as
adjustable counterweights, tuning wheel, moment
compensators or PTO, which are shown as alter-
natives in Section 5.06
Engine masses and centre of gravity
The partial and total engine masses appear from
Section 19.04, ‘Dispatch Pattern’, to which the
masses of water and oil in the engine, Section
5.08, are to be added. The centre of gravity is
shown in Section 5.07, in both cases including the
water and oil in the engine, but without moment
compensators or PTO.
Gallery outline
Section 5.06 show the gallery outline for engines
rated at nominal MCR (L1).
Engine pipe connections
The positions of the external pipe connections on
the engine are stated in Section 5.09, and the cor-
responding lists of counterflanges for pipes and
turbocharger in Section 5.10.
The flange connection on the turbocharger gas
outlet is rectangular, but a transition piece to a cir-
cular form can be supplied as an option: 4 60 601.
To Next Page
Loading...
Need help?
General
