MAN B&W 18.03
Page 2 of 2
MAN Diesel
MAN B&W MC/MCC engines 198 62 352.1
Sensors required for the CoCoS-EDS online engine performance analysis, option: 4 75 29, see Table
8.03.0. All pressure gauges are measuring relative pressure, except for ‘PT 8802 Ambient pressure’.
Table 18.03.01: List of sensors for CoCoS-EDS
Sensor Parameter name
No.
sensors
Recommended
range
Resolu-
tion 3)
Remark
Fuel oil system data
PT 800 Inlet pressure 0 0 bar 0. bar
TE 8005 Inlet temperature 0 200 °C 0. °C
Cooling water system
PT 842 Pressure air cooler inlet A/C 0 - 4 bar 0. bar
TE 8422 Temperature air cooler inlet 0 00 °C 0. °C
TE 8423 Temperature air cooler outlet A/C 0 00 °C 0. °C
PDT 8424 dP cooling water across air cooler A/C 0 - 800 mbar 0. mbar
Scavenging air system
PT 860 Scavenge air receiver pressure Rec. 0 4 bar mbar )
TE 8605 Scavenge air cooler air inlet temperature A/C 0 200 °C 0. °C
PDT 8606 dP air across scavenge air cooler A/C 0 00 mbar 0. mbar
PDT 8607 dP air across T/C air intake lter T/C 0 - 00 mbar 0. mbar
TE 8608 Scavenge air cooler air outlet temperature A/C 0 00 °C 0. °C Optional if one T/C
TE 8609 Scavenge air receiver temperature Rec. 0 00 °C 0. °C
TE 862
T/C air intake temperature T/C 0 00 °C 0. °C
Exhaust gas system
TC 870 Exhaust gas temperature at turbine inlet T/C 0 - 600 °C 0. °C
TC 8702 Exhaust gas temperature after exhaust valve Cyl. 0 - 600 °C 0. °C
PT 8706 Exhaust gas receiver pressure Rec. 0 - 4 bar 0.0 bar
TC 8707 Exhaust gas temperature at turbine outlet T/C 0 - 600 °C 0. °C
PT 8708 Turbine back presssure T/C 0 - 00 mbar 0. mbar
General data
ZT 880 Turbocharger speed T/C rpm rpm
PT 8802 Ambient pressure 900 ,00 mbar mbar Absolute!
ZT 4020 Engine speed rpm 0. rpm )
XC 3003 Governor index (absolute) mm 0. mm
– Power take off/in from main engine shaft kW kW With option
(PTO/PTI) installed
Pressure measurement
XC40 Mean Indicated Pressure, MIP Cyl. bar 0.0 bar 2)
XC402
Maximum Pressure, Pmax Cyl. bar 0. bar 2)
XC403
Compression Pressure, Pcomp Cyl. bar 0. bar 2)
– PMI online engine speed Cyl. rpm 0. rpm 2)
CoCoSEDS Sensor List
) Signal acquired from the Alarm Monitoring System
2) In case of MAN Diesel PMI system: signal from PMI system. Other MIP systems: signal from manual input
3) Resolution of signals transferred to CoCoS-EDS (from the Alarm Monitoring System).