Page 1 of 3
MAN Diesel
MAN B&W MC/MCC engines 198 70 415.1
Additional Spares
Beyond class requirements or recommendation, for easier maintenance and increased security in operation.
Cylinder cover, section 90101
4 Studs for exhaust valve
4 Nuts for exhaust valve
½ set Orings for cooling jacket
1 Cooling jacket
½ set Sealing between cyl.cover and liner
4 Spring housings for fuel valve
(applicable for 98-50MC/MC-C only)
Hydraulic tool for cylinder cover, section 90161
1 set Hydraulic hoses with protection hoses com-
plete with couplings
8 pcs Orings with backup rings, upper
8 pcs Orings with backup rings, lower
Piston and piston rod, section 90201
1 box Locking wire, L=63 m
5 Piston rings of each kind
2 Drings for piston skirt
2 Drings for piston rod
Piston rod stuffing box, section 90205
15 Self-locking nuts
5 Orings
5 Top scraper rings
15 Pack sealing rings
10 Cover sealing rings
120 Lamellas for scraper rings
30 Springs for top scraper and sealing rings
20 Springs for scraper rings
Cylinder frame, section 90301
½ set Studs for cylinder cover for one cyl.
1 Bushing
Cylinder liner and cooling jacket, section 90302
1 Cooling jacket of each kind
4 Non return valves
1 set Orings for one cylinder liner
½ set Gaskets for cooling water connection
½ set Orings for cooling water pipes
1 set Cooling water pipes between liner and cover
for one cylinder
Mechanically driven cylinder lubricator drive,
section 90305
1 Coupling
3 Discs
MAN B&W Alpha Cylinder Lubricating System,
section 90306
1 set Spares for MAN B&W Alpha lubricator for 1cyl.
1 Lubricator
2 Feed back sensor, complete
1 Suction filter element for pump station
1 Pressure filter element for pump station
1 Complete sets of Orings for lubricator
(depending on no. of lubricating per cylinder)
6 3A, 3 pcs. 12A ceramic or sand filled fuses
2 6.3 x 32 mm, for MCU, BCU & SBU
LED’s (Light Emitting Diodes) for visual feed
back indication
Connecting rod and crosshead, section 90401
1 Telescopic pipe
2 Thrust piece
Chain drive and guide bars, section 90601
4 Guide bar
1 set Locking plates and lock washers
Chain tightener, section 90603
2 Locking plates for tightener
Camshaft, section 90611
1 Exhaust cam (split repair cam if possible)
1 Fuel cam (split repair cam if possible)
Indicator drive, section 90612
1 set Gaskets for indicator valves
3 Indicator valves/cocks complete
Regulating shaft, section 90618
3 Resilient arm, complete
Arrangement of engine side console, plate 90621
2 Pull rods
Table 19.07.01a: Additional spare parts beyond class requirements or recommendation, option: 4 87 603
To Next Page
Loading...
Need help?
General
