MAN B&W 5.11
Page 1 of 1
MAN Diesel
198 41 765.7MAN B&W MC/MCC, ME/ME-C/MEGI/MEB engines
Engine Seating and Holding Down Bolts
The latest version of most of the drawings of this
section is available for download at www.mandie-
sel.com under ‘Marine’ → ‘Low Speed’ → ‘Instal-
lation Drawings’. First choose engine series, then
engine type and select ‘Engine seating’ in the
general section of the list of drawings available for
download.
Engine seating and arrangement of holding
down bolts
The dimensions of the seating stated in Figs.
5.12.01 and 5.12.02 are for guidance only.
The engine is designed for mounting on epoxy
chocks, EoD: 4 82 102, in which case the under-
side of the bedplate’s lower flanges has no taper.
The epoxy types approved by MAN Diesel are:
• ‘Chockfast Orange PR 610 TCF’ from
ITW Philadelphia Resins Corporation, USA
• ‘Durasin’ from Daemmstoff
Industrie Korea Ltd
• ‘Epocast 36’ from
H.A. Springer - Kiel, Germany.
To Next Page
Loading...
Need help?
General
