Man B&W L35MC6-TII User Manual

MAN B&W 19.01
Page 2 of 2
MAN Diesel
MAN B&W MC/MC-C, ME/MEC/MEGI/ME-B engines 198 76 203.0
MAN Diesel’s recommendations for shop trial,
quay trial and sea trial are available on request.
In connection with the shop trial test, it is required
to perform a pre-certification survey on engine
plants with FPP or CPP, options: 4 06 060a Engine
test cycle E3 or 4 06 060b Engine test cycle E2
respectively.
Spare Parts
List of spare parts, unrestricted service
The tendency today is for the classification societ-
ies to change their rules such that required spare
parts are changed into recommended spare parts.
MAN Diesel, however, has decided to keep a set
of spare parts included in the basic extent of de-
livery, EoD: 4 87 601, covering the requirements
and recommendations of the major classification
societies, see Section 19.06.
This amount is to be considered as minimum
safety stock for emergency situations.
Additional spare parts recommended by
MAN Diesel
The abovementioned set of spare parts can be
extended with the ‘Additional Spare Parts Recom-
mended by MAN Diesel’, option: 4 87 603, which
facilitates maintenance because, in that case, all
the components such as gaskets, sealings, etc.
required for an overhaul will be readily available,
see Section 19.07.
Wearing parts
The consumable spare parts for a certain period
are not included in the above mentioned sets, but
can be ordered for the first 1, 2, up to 10 years’
service of a new engine, option: 4 87 629, a ser-
vice year being assumed to be 6,000 running
hours.
The wearing parts that, based on our service
experience, are estimated to be required, are di-
vided into groups and listed with service hours in
Tables 19.08.01 and 19.08.02.
Large spare parts, dimensions and masses
The approximate dimensions and masses of the
larger spare parts are indicated in Section 19.09.
A complete list will be delivered by the engine
maker.
Tools
List of standard tools
The engine is delivered with the necessary special
tools for overhauling purposes. The extent, di-
mensions and masses of the main tools is stated
in Section 19.10. A complete list will be delivered
by the engine maker.
Tool Panels
Most of the tools are arranged on steel plate pan-
els, EoD: 4 88 660, see Section 19.11 ‘Tool Panels’.
It is recommended to place the panels close to the
location where the overhaul is to be carried out.

Man B&W L35MC6-TII Specifications

General

Brand	Man
Model	B&W L35MC6-TII
Category	Engine
Language	English