Parker Hannifin
P Series User Guide ï¼’
User Information
P series products are used to control electrical and mechanical components
of motion control system. You should be test your motion system for safety
under all potential conditions.
Failure to do so can result in damage to equipment and/or serious injury to
P Series products and the information in this user guide are the proprietary property of
Parker Hannifin Corporation or its licensers, and may not be copied, disclosed, or used for
any purpose not expressly authorized by the owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we reserve the right
to change this user guide and software and hardware mentioned therein at any time
without notice.
In no event will the provider of the equipment be liable for any incidental, consequential, or
special damages of any kind or nature whatsoever, including but not limited to lost profits
arising from or in any way connected with the use of the equipment or this user guide.
© 2014 Parker Hannifin Corporation
All Rights Reserved
Technical Assistance
Contact your local automation technology center (ATC) or distributor.
Parker Hannifin
Electromechanical Automation North America
5500 Business Park Drive
Rohnert Park, CA 94928
Telephone: (707) 584-7558
Fax: (707) 584-8029
Email:
emn_support@parker.com
Internet:
http://www.parkermotion.com
Asia
Parker Korea Ltd.
Automation Korea Division
759-10, Geumui-ri, Jangan-myeon,
Hwaseong-si, Gyeonggi-do
445-941, Korea
Email: akd_support@parker.com
To Next Page
Loading...
Need help?
General
