Polaris 800 RMK ASSAULT 2011 User Manual

3.52
Engine/Cooling/Exhaust
PRO-RIDE DC-CFI-2 Exhaust System
NOTE: Always use the stainless steel (gray) springs
to connect the exhaust pipe to the exhaust manifold.

When removing the exhaust pipe, disconnect the EGT
pr
obe wire harness. Do not remove the EGT probe
from the pipe if not necessary.
EXHAUST PIPE
ZINC-PLATED (YELLOW) SPRINGS
STAINLESS STEEL (GRAY) SPRINGS
GASKET
ISOLATOR
A
B
GASKET
EXHAUST SEAL
ZINC-PLATED (YELLOW) SPRINGS
ZINC-PLATED (YELLOW) SPRINGS
ZINC-PLATED (YELLOW) SPRINGS
CHASSIS GROMMET
= T
A: EGT Sensor: 32 ft-lbs (44 Nm) Apply anti-seize to
threads.

B: Exhaust Manifold Fasteners: 22 ft-lbs (30 Nm)

Polaris 800 RMK ASSAULT 2011 Specifications

General

Brand	Polaris
Model	800 RMK ASSAULT 2011
Category	Snowmobiles
Language	English