235
The utility functions for the selected bank are assigned to
the 1st row or 2nd row in key bus mode, and to the 1st row
to 4th row in free assign mode.
Executing a utility function
This section describes execution in key/AUX bus
delegation mode as an example.
1
Select a bank using the delegation buttons in the 1st
row.
For details about selecting a bank, see “Selecting a
bank” (page 234).
The utility functions for the selected bank are
a
ssigned to the cross-point buttons in the 2nd row.
2
Press the button assigned with the target action to
operate in the 2nd row.
Multi Program 2
Overview
This function divides the hardware of a single switcher
bank into two (main and sub), allowing you to create
images separately on each.
Multi program 2 mode and M/E split cannot be set at the
sa
me time. Enabling M/E split will disable multi program
2 mode and switch to standard mode.
Main and sub
You can set separate backgrounds, keys, and transitions
for main and sub in multi program 2 mode.
Program output on the main side
Note
Background B
Key (key 1 to key 8)
Background A
To Next Page
Loading...
Need help?
General
