257
For details about settings, see “Inserting the first
keyframe automatically when an empty register is
recalled” (page 420).
• You can configure a setting such that when another
e
ffect timeline register is recalled while editing an
effect timeline, the edited effect timeline is saved
automatically (auto save function).
For details about settings, see “Saving an effect
timeline automatically” (page 421).
• You can configure a setting such that effect timeline
ed
it mode ends when a register is recalled when the
utility/shotbox control block is in effect timeline edit
mode.
For details about settings, see “Exiting edit mode
automatically when a register is recalled during
editing” (page 421).
1
Press the [EFF] button.
The [EFF] button and [RCALL] button turn on
a
mber, and the numeric keypad control block
switches to effect timeline operation mode.
2
Select the target region to set using the region
selection buttons.
You can select multiple regions.
For details about selecting a region, see “Selecting a
region” (page 255).
To select all regions configured beforehand
Press the [ALL] button.
For details about setting the regions selected
si
multaneously, see “Setting Regions Selected
Simultaneously” (page 402).
3
Enter a register number in the numeric keypad area.
For details about selecting a register, see “Selecting
a register” (page 256).
To add a temporary attribute
Press the [EFF DISS] button, turning it on green.
4
Press the [ENTER] button.
The specified register is recalled.
To undo a register recall
To undo a recall immediately after recalling a register,
press the
[UNDO] button.
Saving an Effect Timeline
An effect timeline register can be saved by switching the
numeric keypad control block to effect timeline operation
mode.
1
Press the [EFF] button.
The [EFF] button and [RCALL] button turn on
amber
, and the numeric keypad control block
switches to effect timeline operation mode.
2
Select the target region to set using the region
selection buttons.
You can select multiple regions.
For details about selecting a region, see “Selecting a
region” (page 255).
To select all regions configured beforehand
Press the [ALL] button.
For details about setting the regions selected
sim
ultaneously, see “Setting Regions Selected
Simultaneously” (page 402).
3
Press the [STORE] button, turning it on amber.
4
Enter a register number in the numeric keypad area.
The currently recalled register number is displayed
on
the display on the right side. To select another
register, enter a register number.
For details about selecting a register, see “Selecting
a register” (page 256).
5
Press the [ENTER] button.
The effect timeline is saved in the specified register.
The [RCALL] button and [STORE STATS] button
t
urn on amber.
To undo saving of an effect timeline
While the [STORE STATS] button is lit amber, press and
hol
d the [STORE STATS] button and press the [UNDO]
button.
Creating and Editing an Effect
Timeline
You can create and edit an effect timeline by recalling an
effect timeline register.
After creating and editing an effect timeline, save it in an
effect
timeline register.
To Next Page
Loading...
Need help?
General
