Sony MKS-XIC01 User Manual

Chapter
303
18
Macros
Overview
A macro is a function that saves control panel operations
and menu operations in a register which can be used to
reproduce the same operations. You can save a macro in
a register and then recall it as required.
There are 999 macro registers on each control panel.
Events
Control panel operations and menu operations registered
in a macro are called “events.”
Up to 99 events can be registered in a single macro
r
egister and a total of 1500 events can be registered in all
macro registers.
Control panel operations that can be registered
as
an event
a) In the case of an event that inserts or removes a key, the state at the time
of event registration (key on or key off) is also registered in the macro.
When a macro is executed, the event is only reproduced if the key state
matches the registered state.
Menu operations that can be registered as an
event
Menu operations in the Home menu hierarchy.
However, the following menu operations cannot be
regi
stered.
Control block Event
Cross-point control
bl
ock
• Select cross-point
• Recall function assigned to cross-
po
int
• Enable/disable AUX mix
• Delegation selection in cross-point
b
utton row (free assign mode only)
• Select a cross-point assign table
(ICP-X7000 only)
• Recall a cross-point pad page
(
ICP-X7000 only)
Transition control
block
• Auto transition and cut
• Independent key transition auto
t
ransition and key on/off
a)
• Select next transition
• Select transition type
• Enable/disable pattern limit
Transition control
bl
ock (simple type)
• Auto transition and cut
• Select transition type
• Enable/disable pattern limit
Independent key
t
ransition control
block
• Independent key transition auto
transition and key on/off
a)
Flexi Pad control
block
• Select transition type of
independent key transition
• Recalling the following functions
– Snapshot
– Key snapshot
– Wipe snapshot
– DME wipe snapshot
–Shotbox
• Effect timeline execution and
re
wind
Key fader control
blo
ck
• Independent key transition auto
transition and key on/off
a)
• Select transition type
• Recall key snapshot
Device control
blo
ck
• Following operations in device/
frame memory/clip player operation
mode
– Playback
–Stop
– Fast forward
–Rewind
– Move to start point
– Set start point
– Record to VTR/disk recorder
– Set frame memory/clip player
l
oop
Numeric keypad
co
ntrol block
• Recalling the following functions
– Effect timelines
– Snapshots
– Shotboxes
Utility/shotbox
co
ntrol block
• Recall function assigned to
memory recall button
• Effect timeline execution, rewind,
and execution direction selection
Utility control block • Recall function assigned to
m
emory recall button
• Effect timeline execution, rewind,
and execution direction selection
Control block Event

Sony MKS-XIC01 Specifications

General

Brand	Sony
Model	MKS-XIC01
Category	Switch
Language	English