249
– Key snapshots
– Key memory
• When using DME channels on a key to be copied/
swapp
ed, the DME channel selection status may not be
able to be copied/swapped depending on the number of
DME channels that can be used.
• When settings for a normal key are copied to an SL key,
t
he settings for functions that cannot be used on SL keys
are reset to the default values.
Wipes/DME wipes
Copy/swap wipe and DME wipe settings using the Home
>
Utility > Copy/Swap > Wipe/DME Wipe menu
(18201.33).
Select a tab to change the target wipe for operation.
[Wipe] tab: Wi
pes
[Key Wipe] tab:
Independent key transition wipes
[DME Wipe] tab: DM
E wipes
[Key DME Wipe] tab: I
ndependent key transition DME
wipes
DMEs
Copy/swap DME settings using the Home > Utility >
C
opy/Swap > DME menu (18201.34).
Executing a Copy/Swap
This section describes copying a wipe as an example.
1
Open the Home > Utility > Copy/Swap > Wipe/DME
Wipe menu (18201.33).
2
Select the [Wipe] tab.
3
In the list on the left, select a copy source wipe.
4
In the list on the right, select a copy destination wipe.
5
Press the [Copy] button.
To swap
Select the wipes to swap in the lists on the left and right,
and
press the [Swap] button.
To undo a copy or swap
To undo a copy or swap immediately after copying/
swapp
ing, press the [Undo] button.
Executing a copy using buttons
You can perform the following copy functions using
button operations on the control panel.
To copy using control panel buttons, press and hold the
copy
source button and press the copy destination button.
Example:
Copying a wipe
Press and hold the [WIPE] button in the Flexi Pad control
bl
ock of the copy source switcher bank, and press the
[WIPE] button in the Flexi Pad control block of the copy
destination switcher bank.
Copy target Using buttons
Switcher banks [SNAPSHOT] button in the Flexi Pad
c
ontrol block
Keys [KEY1] button to [KEY8] button in key
operation mode in the Flexi Pad control
block
Copy source: Delegation buttons [KEY1]
to
[KEY8] in the key control block
Copy destination: [KEY1] button to
[KEY8
] button in key operation mode in
the Flexi Pad control block
Wipes [WIPE] button in the Flexi Pad control
bl
ock
DME wipes
[DME WIPE] button in the Flexi Pad
control block
Copy target Using buttons
To Next Page
Loading...
Need help?
General
