432
Setting a TCP/IP Connected Device
1
Open the Home > Setup > External Device > Serial/
Net Port Setting > General TCP/IP menu (19105.66).
A list of ports is shown on the left and the settings
st
atus of the selected port is shown on the right.
2
In the list on the left, select the target port to set.
3
Press the [IP Address] button and enter an IP address
using the keyboard.
4
Press the [TCP/IP Port] button and enter a port
number in the numeric keypad window.
5
In the list on the right, set the value of the item.
Press the [Setting] button for an item to set and enter
a
setting in the numeric keypad window.
Item Item description
Internal
Pa
rameter (1)
to (10)
Reserved for future use.
Set the value to “255”.
To Next Page
Loading...
Need help?
General
